RIIMPO319E Conduct backhoe/loader operations
This unit covers the conducting backhoe/loader operations in the civil construction industry. It includes: planning and preparing; conducting machine pre-operational checks; operating backhoe/loaders; lifting, carrying and placing materials; selecting, removing and fitting attachments; relocating the backhoe/ loaders; carrying out.
Why Do I Need Wheeled Loader Training?
The Work Health & Safety Act was introduced by the Australian Government in 2011, superceeding existing legislation, and marking it easier for workers to oeprate different kinds of plant equipment in a safe and responsible manner.
While a licence or certification is no longer required to operate an excavator, wheeled loader, skid steer or other other earthmoving equipment, this doesn't mean an operator can just hop on and start work. SafeWork Australia has set out guidelines for the operation of plant equipment, with a focus on 'Persons Conducting a Business or Undertaking (PCBU)s (that's the employer) providing the required instruction, training and supervision to perform their work safely.
Who has health and safety duties in relation to plant at the workplace?
A person conducting a business or undertaking has the primary duty under the WHS Act to ensure, so far as is reasonably practicable, that workers and other persons are not exposed to health and safety risks arising from the business or undertaking. This duty includes ensuring, so far as is reasonably practicable:
- the provision and maintenance of safe plant, and
- the safe use, handling, storage and transport of plant
Responsibilities of the PCBU
The PCBU must ensure that:
- Operators receive adequate information, training, instruction and supervision.
- Operators are competent.
- Equipment is used appropriately to minimise risks to health and safety.
And that operators are aware:
- How to operate the equipment, including the correct use of control measures.
- Who else is authorised to use the equipment.
- Maintenance requirements including safe shutdown, inspection, clean and repair.
Ensuring Competency for Operators
The PCBU on your job site may look for the following when assessing your eligibility to operate plant:
- Logbooks for work-based training conducted by an operator skilled and experienced in the operation of the same type of equipment.
- A previously issued certificate under the Workplace Health & Safety Regulation 2008.
- A statement of attainment for a National Unit of Competency
If you lack the appropriate training or work history you can not operate plant.
WHS PCBUs, Workers & Officers Fact Sheet
Definitions of PCBUs and Workers
Code of Practice - Managing the Risks of Plant in the Workplace
Full Course Description
This unit describes the skills and knowledge required to conduct civil construction wheeled front end loader operations.
This unit is appropriate for those working in operational roles.
Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Elements and Performance Criteria
1. Plan and prepare for wheeled front end loader operations
- 1.1 Access, interpret and apply wheeled front end loader operations documentation and ensure the work activity is compliant
- 1.2 Obtain, read, interpret, clarify and confirm work instructions
- 1.3 Identify and address risks, hazards and environmental issues and implement control measures
- 1.4 Select and wear personal protective equipment appropriate for work activities
- 1.5 Obtain, identify and implement traffic management signage requirements
- 1.6 Select equipment for work activities and check for faults
- 1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Operate front end loader
- 2.1 Carry out pre-start, start-up, park, shutdown and secure equipment procedures
- 2.2 Coordinate activities with others at the site prior to commencement of, and during, the work activity
- 2.3 Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment
- 2.4 Drive and operate front end loader, and modify the operating technique to meet changing work conditions
- 2.5 Complete work plan within the operating capacity of the equipment
- 2.6 Act on or report monitoring systems and alarms
3. Attach, secure, lift, carry and place materials
- 3.1 Conduct communication practices associated with transportation and lifting of materials
- 3.2 Establish weight of load and ensure it is within safe operational limits of the machine
- 3.3 Select, attach and use slings and lifting gear in accordance with safe working load requirements
- 3.4 Position machinery to ensure stability and locate to effectively shift materials according to job specifications
- 3.5 Shift load safely and effectively
- 3.6 Move load using hand/audible/communication signals
4. Prepare to relocate the front end loader
- 4.1 Prepare front end loader for relocation
- 4.2 Move front end loader safely within and/or between work areas, observing relevant codes and traffic management requirements
- 4.3 Load and unload machine from float/trailer
5. Carry out machine operator maintenance
- 5.1 Prepare machine for maintenance
- 5.2 Conduct inspection and fault finding
- 5.3 Carry out scheduled maintenance tasks
- 5.4 Process written maintenance records
6. Conduct housekeeping activities
- 6.1 Clear work area and dispose of or recycle materials
- 6.2 Process records
Training and assessment delivered on behalf of RAISE Training RTO 91655